Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Como?
Spring replacement in Como typically costs $180 to $340 for one torsion spring, including the spring and labor. Homes with two springs, which is most modern double doors, usually need both replaced as a matched pair, so budget closer to $360 to $680. The written estimate we give you after we look at the door is the final price, and getting that estimate costs nothing.
We answer 24/7 at (855) 514-8247, and fast dispatch from 7am to 7pm, Sunday through Friday, gets a technician to your door when a spring lets go and the car is stuck inside.
Key Takeaways
- One torsion spring: typically $180 to $340 in Como.
- A matched pair: about double that, so roughly $360 to $680.
- Extension springs on older doors can land lower; high-cycle springs and heavy custom doors land higher.
- Springs are replaced together because a second spring of the same age is close to failing too.
- Estimates are free, and the written quote sets the price.
Spring Replacement Cost Breakdown (2026)
Every spring job has the same basic pieces: the spring itself, the labor to wind it safely, and sometimes a related part that wore out alongside it. Here’s how those pieces stack up for a typical Como home.
| Item | Typical estimated range |
|---|---|
| One torsion spring, installed | $180 – $340 |
| One extension spring, installed | $180 – $340 |
| Matched pair (most double doors) | $360 – $680 |
| Cable repair, if a cable is frayed or snapped | $130 – $250 |
| Roller replacement alongside the springs | $110 – $220 |
| Track realignment, if the door jumped the track | $120 – $240 |
| Panel replacement, if the door buckled | $250 – $500 |
| Full garage door repair (bundled work) | $150 – $600 |
The spring line is where most of the cost sits, and the rest depends on whether the failure took anything else with it. A snapped spring usually fails cleanly – the door just won’t lift. When a spring lets go while the door is partway up, though, the door can come down hard and bend a track or crack a panel, which is why you’ll sometimes see track or panel work added to the bill. A door that’s been run for months on a tired spring wears its cables and rollers faster, so bundling those into the same visit usually costs less than booking them separately. Expect a final estimate that lands somewhere between the one-spring price and the pair price, plus any related parts your door actually needs.
What Affects Spring Replacement Pricing in Como
Two doors the same width can come in at very different prices. These are the factors that move the number up or down for a Como home.
- One spring or two. A single-car door often carries one spring; a double door usually carries two that are replaced together. That’s the biggest swing in the estimate, and it’s why we always quote one spring and the pair separately so you can see exactly what you’re paying for.
- Spring type and cycle rating. Standard torsion springs cost less than high-cycle springs rated for more open-and-close cycles. If your door gets used heavily – say a family that comes and goes all day – a higher-cycle spring can be worth the extra, but it does raise the price.
- Door weight and size. Oversized, insulated, or wood doors are heavier and need stronger springs, and heavier springs take more care to wind and set. Lightweight single doors on older Como garages sit at the low end.
- Condition of cables, drums, and rollers. Springs rarely fail in total isolation. If the cables are frayed or a drum is worn, replacing them in the same visit avoids a second call and protects the new springs.
- Age and type of the door hardware. Extension-spring doors, common on older Como garages, are set up differently from torsion systems, and some older setups need a conversion or added safety hardware that affects the total.
- Access and ceiling height. A low-clearance or tightly framed garage makes the job slower and more careful, and that can nudge labor up. A standard-height, open-ceiling garage keeps it simple.
How to Save on Spring Replacement
You can’t safely cut corners on the spring itself – a wound torsion spring holds enough energy to cause serious injury, and the winding and setting are exactly the part a trained technician should handle. What you can do is keep the total down without risking the door.
- Replace the pair together, not one at a time. It feels cheaper to swap just the broken spring, but the second one is the same age and usually follows within months. Doing both now means one labor charge instead of two.
- Fix related wear in the same visit. If your cables or rollers are on their way out, adding them to a spring job costs less than a separate appointment later.
- Get the estimate before the work, in writing. A free written estimate tells you the spring cost and any related parts up front, so there are no surprises when the job is done. Call (855) 514-8247 to set one up.
- Don’t run the door on a failing spring. Forcing a door with a weak or broken spring strains the opener and cables, and that turns a spring job into a bigger repair. Catching it early keeps the price where it belongs.
- Ask about the cycle rating. If you use the door a lot, a higher-cycle spring costs a bit more now but lasts longer, which is cheaper over the years than replacing standard springs twice.
When you’re ready, our spring replacement service covers the whole job, and the estimate is free. For anything else on the door, from opener issues to a full replacement, our garage door repair team handles it in the same visit.
Why Springs Fail and Why They’re Worth Fixing Right
A garage door spring is a wound coil of steel under constant tension, and every open and close cycle works it a little closer to breaking. In Como’s cold winters and warm summers, that metal expands and contracts through the seasons, and the constant cycling eventually wins. When a spring snaps, the door becomes unsafe to operate – the opener will strain or the door may drop – so it’s not a repair to put off.
This is also why spring work is one of the most commonly botched garage door repairs. Winding a torsion spring by hand with the wrong bars, or without the right knowledge of the door’s weight and balance, is genuinely dangerous. A specialist sets the spring to the door’s exact weight so it lifts smoothly and the opener isn’t fighting it. That balance is what keeps the rest of the door – cables, rollers, tracks – from wearing out early. Our technicians have up to 11 years of experience, and spring repair is a dedicated service for us, not a sideline.
Whatever brand your door is – LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, or Raynor – we work on your equipment with brand-specific knowledge, so you don’t have to replace a system that’s otherwise fine just to get it fixed.
Repair or Replace? When a Spring Job Turns Into a New Door
Most of the time a spring replacement is all you need, and the door is back to normal the same day. But if the door is old, the panels are bent, and several parts are failing at once, the math can shift toward a new door. Here’s how to think about it.
- Repair makes sense when the door itself is sound – panels straight, tracks true, opener working – and the problem is one worn-out spring system. That’s a straightforward spring job.
- Repair also makes sense when a spring failure damaged a cable or roller but the door is otherwise solid. Fixing those parts alongside the springs keeps the door going.
- Replacement can make sense when the door is at the end of its life: multiple bent panels, a frame that’s pulling apart, and repeated repairs adding up. A new door installation typically runs $700 to $2,200, so if you’re facing several big repairs on an old door, it’s worth comparing the two.
We’ll tell you honestly which one your door needs, because upselling a replacement onto a door that just needs springs doesn’t help anyone. Call (855) 514-8247 and we’ll look at the door and give you a straight answer, with a free written estimate either way.
Same-Day and Emergency Spring Service in Como
A broken spring tends to happen at the worst time – the morning you need to leave, or a Sunday when the car’s blocked in. That’s why emergency garage door service is part of what we do, not an afterthought. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, gets a technician out to handle the failure. We’re closed Saturday, so a door that fails then gets booked into the next opening on Sunday.
When we arrive, we assess the whole door – not just the snapped spring – so we can catch a frayed cable or worn roller before it becomes the next call. You get the estimate in writing before any work starts, and the price is set per job, so there’s no guessing at the total.
FAQs – Spring Replacement Cost
How much does it cost to replace a garage door spring in Como?
Typical spring replacement in Como runs $180 to $340 for a single spring, installed. Most double doors have two springs and need both replaced as a matched pair, which brings the total to about $360 to $680. Call (855) 514-8247 for an exact quote – estimates are free.
Is it cheaper to replace one spring or both?
Replacing both is usually the better value, even though the pair costs more up front. A second spring of the same age is likely to fail within months, and doing it now means one labor charge instead of two visits. For a typical Como door, expect the pair at roughly $360 to $680 versus two separate single-spring jobs over time. Call (855) 514-8247 and we’ll quote both options so you can compare.
Can you come today if my spring snapped?
Often, yes – spring failures are exactly what same-day and emergency service is for. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, gets a technician out as soon as possible. Call (855) 514-8247 to check availability for today.
Why did my spring break and does that cost extra?
Springs break from normal wear – every open and close works the steel closer to failure, and Como’s seasonal temperature swings speed that up. A standard spring failure is a routine spring replacement in the $180 to $340 range for one spring, and it doesn’t add a separate charge just because it broke. If the failure also damaged a cable, track, or panel, that part is priced on its own. Call (855) 514-8247 for a free estimate on your door.
What’s the difference between one spring and a pair in the price?
One spring covers a single-car door or half of a two-spring system at roughly $180 to $340. A pair means both springs on a double door, replaced together for balance, at about double that range – roughly $360 to $680. The written estimate shows exactly which setup your door has. Call (855) 514-8247 to get yours.
Get a Free Spring Replacement Estimate in Como
When a spring goes, you want a straight answer on what it takes to fix it and what it costs – not a runaround. We’ll look at your door, tell you whether it’s a one-spring or pair job, and give you a written estimate before any work begins. One call covers it all: springs, opener issues, cables, and full door replacement when that’s the right move. If your door is stuck right now, call (855) 514-8247. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, gets you back on track.
Pricing reflects the Como market as of 2026. Garage Door Repair Como offers free estimates – call (855) 514-8247.
What Our Customers Say
"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Reggie Hampton"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
- Jason Barrett"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Travis Norris